Aeroforce Technology Inc Technical Forums

"Knowledge is power"

All times are UTC - 6 hours




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: New Product - details
PostPosted: Tue Feb 10, 2009 2:30 pm 
Offline

Joined: Wed Aug 22, 2007 7:02 pm
Posts: 4673
Location: Avon, OH
Due later this 1st quarter of 2009 is our Analogic analog scan gauge. This gauge does not read OBD2 data, but rather only accepts standard analog inputs. Therefore it can be used in older pre-OBD2 cars, or in conjunction with the Interceptor scan gauge when several additoinal sensors are requried. It has the following proposed features:

- Four 0-5v inputs channels
- Two EGT inputs
- Can input an RPM signal
- Can log data
- Has high intensity warning lights that can be set using a 1 or 2 parameter algorithm. P1, P1 or P2, P1 and P2. For example, trigger the lights when rpm exceeds 6000 rpm, or when intake air temp exceeds 130 F and coolant exceeds 210 F, or when air fuel ratio is above 12.5 or trans temp is above 250 F.
- Integrated output for 12v relay. Allows you to control a standard 12v automotive relay to turn something on or off. For example, turn on an electric radiator fan when coolant exceeds 180 F, or shut off nitrous when A/F ratio exceeds 13.0.

The gauge will look similar to the Interceptor except for a different logo on the face.

Image

Todd

_________________
Aeroforce Technology


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 30, 2009 11:18 pm 
Offline

Joined: Tue Jun 30, 2009 11:15 pm
Posts: 4
when is this going to be released?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 01, 2009 8:46 pm 
Offline

Joined: Wed Aug 22, 2007 7:02 pm
Posts: 4673
Location: Avon, OH
andrew383 wrote:
when is this going to be released?


July 20th.

Todd

_________________
Aeroforce Technology


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 26, 2009 8:50 am 
Offline

Joined: Wed Aug 26, 2009 8:25 am
Posts: 16
Are these gagues out yet? Pricing available?


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 27, 2009 10:36 am 
Offline

Joined: Wed Aug 22, 2007 7:02 pm
Posts: 4673
Location: Avon, OH
HeavyAssault wrote:
Are these gagues out yet? Pricing available?


We've added a peak recall function which delayed the release several weeks. They will be added next week and will be priced very closely to the Interceptor gauge.

Todd

_________________
Aeroforce Technology


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 24, 2009 2:22 am 
Offline

Joined: Thu Sep 24, 2009 2:16 am
Posts: 1
Location: nowhere
im looking for the ability to monitor timing and knock on a 96 neon. will this work or is there something else? or is this not possible? thanks


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 24, 2009 8:39 pm 
Offline

Joined: Wed Aug 22, 2007 7:02 pm
Posts: 4673
Location: Avon, OH
vad3r wrote:
im looking for the ability to monitor timing and knock on a 96 neon. will this work or is there something else? or is this not possible? thanks


Not with this gauge. We don't have anything that will display knock on this car, but our ISO gauge that we are releasing for imports will display timing.

Todd

_________________
Aeroforce Technology


Top
 Profile  
 
PostPosted: Sat Sep 26, 2009 2:21 pm 
Offline

Joined: Sat Sep 26, 2009 2:14 pm
Posts: 2
Is there a new release date, or maybe a way to pre order so when they are available we can get them as soon as possible. I got my A-Pillar out just waiting for this bad boy. Thanks in advance for any info.

LucidStrife


Top
 Profile  
 
PostPosted: Wed Sep 30, 2009 8:12 pm 
Offline

Joined: Wed Aug 22, 2007 7:02 pm
Posts: 4673
Location: Avon, OH
LucidStrife wrote:
Is there a new release date, or maybe a way to pre order so when they are available we can get them as soon as possible. I got my A-Pillar out just waiting for this bad boy. Thanks in advance for any info.

LucidStrife


The engineer writing the code for this will post here shortly. I'm told the prototype is being tested, and we have completed gauges that just need the proper production flash in order to start selling them.

Todd

_________________
Aeroforce Technology


Top
 Profile  
 
PostPosted: Thu Oct 01, 2009 3:43 pm 
Offline

Joined: Sat Aug 25, 2007 7:28 am
Posts: 267
The analogic will be ready for release next week. Keep an eye on the website for ordering info.

LucidStrife wrote:
Is there a new release date, or maybe a way to pre order so when they are available we can get them as soon as possible. I got my A-Pillar out just waiting for this bad boy. Thanks in advance for any info.

LucidStrife


Top
 Profile  
 
 Post subject: YES!!!
PostPosted: Fri Oct 02, 2009 12:21 am 
Offline

Joined: Sat Sep 26, 2009 2:14 pm
Posts: 2
Thank you! Thank you! Thank you!


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 27, 2009 2:09 pm 
Offline

Joined: Wed Aug 22, 2007 7:02 pm
Posts: 4673
Location: Avon, OH
Analogic gauge is now available! Check it out:

http://www.aeroforcetech.com/products_analogic.html

Thank you.

Todd

_________________
Aeroforce Technology


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB ® Forum Software © phpBB Group | DVGFX2 by: Matt