Temperature Sensor Kits The sensor kits listed below are OEM quality units that come with a 5v regulator/signal conditioner to allow them to be connected and read on our gauges. These can be used to read air, oil, and coolant temperatures. They are calibrated from -40 deg. F to 275 deg. F. For those that have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions. Click on the "Manuals" link on the navigation bar at the top for installation instructions. Air Temperature Sensor Kit (barbed fitting): - Includes sensor and 5v regulator/signal conditioner - includes connector/pigtail. $44.95 Air Temperature Sensor Kit (threaded): - Includes sensor and 5v regulator/signal conditioner - includes connector/pigtail - quick response -3/8" NPT fitting $44.95 Air Temperature sensor and pigtail only (no regulator). Note: will not function with Interceptor or Analogic gauge - must buy "temperature sensor kits" listed elsewhere on this page for this purpose. $21.95 OEM 3/8" Fluid Temperature sensor and pigtail only (no regulator). Note: will not function with Interceptor or Analogic gauge - must buy "temperature sensor kits" listed elsewhere on this page for this purpose. $19.95 Fluid Temperature Sensor Kit: - Includes sensor and 5v regulator/signal conditioner. Fitting is 1/8" NPT. 3/8" standard OEM also available upon request. - includes connector/pigtail. - Can be used to read engine oil temp, engine or liquid intercooler temperature, rear differential temperature, etc 1/8" NPT sensor shown $44.95 Select Fitting Size: 3/81/8 For questions visit our forums here and go to the "Sensor Kit" subforum.
YOU ARE BROWSING: HOME | PRODUCTS | SENSORS © 2005-2009 Aeroforce Technology Inc. All rights reserved.     MADE IN THE USA
SITE BY: MediaBrand